Hydraulic Jacks & Jacking Equipment Australia
We have been manufacturing / Designing High Pressure Hydraulic Jacks & Hydraulic Jacking equipment systems for many companies over the past years covering a broad spectrum of lifting capacities and designs.
Our range of Jacks starts at 10 Tonne up to 2000 Tonne capacity in Load Return, Double Acting and Safe Rams (threaded rod c/w locking collar). Various stroke lengths.
To complement our Hydraulic Jacks we also manufacture a wide range of Power Packs or Pumps to operate the Jacks from single lift operation to multiple lifting points (manual control to complexed solenoid electrical controls. Pump configuration can be Single Speed, Dual Speed or Split Flow with up to 56 individual outlets (High or Low Pressure).
PJM Industrial supplies hydraulic jacks for industrial applications.
Major Hydraulic Jack Suppliers & Manufacurers
PJM Industrial Jacks
PJM Industrial distribute a range of Hydraulic Jacks, Railway Jacks and Hydraulic Hand Pumps. The PJM Industrial Hydraulic Jacks range include:-
- Pancake Jacks
- Flat and Low Height Jacks
- General Purpose Hydraulic Jacks
- Hollow Ram Jack and
- Stage Lift Jacks
These products have been proven, accepted and widely used in
Process Plants - Steel, Cement, Power and Petrochemical, Mining,
Shipyards and Port Trust, Railways, Infrastructure Companies, Heavy
Engineering units, Research and Development.
For more information regarding a specific range of PJM Industrial Hydraulic Jacks, go to the PJM Industrial page.
You can also download the full PJM Industrial Hydraulic Jacks Product catalogue:
PJM Industrial Hydraulic Jacking Equipment Brochure (3818 KB)
Werner Weitner Jacks
PJM Industrial are the the Australian / New Zealand and South Pacific Agent for the WERNER WEITNER range of Hydraulic Jacks, Pumps, Torque Wrenches, Press and associated equipment.
Werner Weitner has supplied high quality products in the German Engineering tradition since 1968. All stages related to products such as design, development, production is processed at the companies headquarters located in Eichstatt Germany.
Werner Weitner is a premium partner for corporate companies operating in the Contruction, Maintenance, Automotive, Aviation and Aerospace and also Petro-chemical Industries. For many years, Werner Weitner has been appriciated and recieved many awards for excellent quality and reliability. (ISO9001:2008)
For more information go to the following page: Werner Weitner Hydraulic Jacking Equipment
Orbit Aluminium Jacks
PJM Industrial have recently been appointed the Australian / New Zealand and South Pacific Agent for Orbit Aluminium Hydraulic Jacks.
Orbit Manufacturing has had 30 successful years of hydraulic industry experience in North America. In 1990 they began manufacturing Aluminium Jacks with a hard anodized coating. In doing so they have virtually eliminated the problems of corrosion with a further benefit being the reduced weight. Aluminium Hydraulic Jacks are upto 60% lighter than a comparitive tonnage steel jack without compromising the jacks structural integrity.
Their range is extensive: Single Acting Solid Jacks, Double Acting Solid Jacks, Double Acting Center Hole Jacks, Single Acting Center Hole Jacks and Lock Nut Cylinders ranging from 30 -150 ton capacities and 2”– 13” strokes.
For more information go to the following page: Orbit Aluminium Range.
Prestressing Equipment Jacks
PJM Industrial Prestressing Equipment Jacks include 10T, 25T & 30T Mono Strand Jacks and Multi Strand Jacks.
The 10 Tonne Mono Jack is ideal for Initialing in the pre-stressing industry and Roof Bolting in the Mining Industry. The 10T Jacks will accept both 12.7 and 15.2mm strand by a simple Jack Jaw change. There are 2 10T Models to choose from with either 150mm & 200mm stroke.
Both 25T & 30T Jacks have the ability to accept 0.5 (1/2”) & 0.6 (5/8”) Strand. They come with carry handle, Spring Loaded Nose or Solid Nose. They are fitted with a Safety Relief Valve & Your choice of Horizontal or Vertical coupler set up - 2 x Male or 2 x Female or Male & Female.
For more information go to the following page: Prestressing Range
PJM Industrial 10T Onioning Jacks will form an Onion anchor on 0.5 or 0.6 Strand simply by changing the Jaws to accommodate whichever strand is being used.
They can be powered by Hand, Air, Electric Power Packs or Electric Double Acting-Power Packs.
For more information select the following Product PDF: Onion Jacks
PJM Industrial 35T & 40T Swaging Jacks are made from highly polished alloy steel with
aluminum bronze piston & gland. They withstand full pressure of 700 Bar and have tool steel die with exclusive taper
to reduce overall operating pressure. To operate, simply load swage into opening, insert strand and start
For more information select the following Product PDF: Swaging Jacks
Barrel & Wedge Swaging Jacks
PJM Industrial Barrel & Wedge Swaging Jacks come in 10T & 25T models.
For more information select the following Product PDF: Barrel and Wedge Swaging Range
If you require more information or have any questions regarding our Hydraulic Jacking Equipment, please feel free to call us on (+61 3) 9553 4882 or 0412 720 638, send us an email at email@example.com or use our Contact Form to submit an inquiry.