Workshop Press: 55 Ton H Frame Press For Sale
PJM Industrial are proud to be distributors of the SPX Power Team range of Workshop Presses & other products and can source any of the Power Team products.
55 Tonne H Frame Press Features
- Full off-center pressing at full rated capacity across the width of upper frame without buckling or bending.
- Maximum ‘daylight’ is 42″ x 36″ (1.067 x 914 mm), making positioning of even bulky work pieces easy.
- The height of the press bed is easily adjusted with the winch; a friction brake prevents the bed from dropping and
handle from spinning upon release. - Presses with single-acting cylinder offer choice of
- two-speed hydraulic hand pump
- electric / hydraulic pump or
- air / hydraulic pump.
Models with double-acting cylinder have an electric / hydraulic pump.
- Workshop press models equipped with the remote control enable an operator to view the work from all sides with fingertip
control of cylinder piston travel.
55 Tonne H Frame Press Dimensions
On the RHS you will see a diagram showing the SPX Power Team 55 Ton H Frame Press simension key & the table below shows the relative dimensions in inches.
55 Ton H Frame Press Accessories
The SPX Power Team 55 ton H Frame workshop press accessories that are available include:
- Polyurethane Hoses
- Hydraulic Oil
On/Off Motor Controls (86 KB)- Workshop Press Accessory Kit (135 KB)
- Threaded Adapters (86 KB)
- “V” Blocks (86 KB)
Simply click on a link above for a PDF with more information about the specific accessory.
55 Ton H Frame Press Technical Data
| Order Number | Capacity (tons) | Type of Cylinder Used | Stroke (mm) | Cylinder Model | Speed-Advance (mm/min) † | Speed-Pressing (mm/min) † | Type Pump | Valve Pump | Pump Model †† | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| SPA556 | 55 | Single-Acting | 159 | C556C | 114 | 12.7 | Air | 2-Way Foot | PA6 | 365 |
| SPM556 | 55 | Single-Acting | 159 | C556C | 5.8 mm/stroke | 0.4 mm/stroke | Hand | Load-Release | P159 | 369 |
| SPM5513 | 55 | Single-Acting | 337 | C5513C | 16.9 mm/stroke | 0.7 mm/stroke | Hand | 2-Way | P460 | 435 |
| SPE556 | 55 | Single-Acting | 159 | C556C | 551 | 38 | Electric | 2-Way ††† | PE172 | 379 |
| SPE5513 | 55 | Single-Acting | 337 | C5513C | 551 | 38 | Electric | 2-Way ††† | PE172 | 445 |
| SPE5513S | 55 | Single-Acting | 337 | C5513C | 620 | 48 | Electric | 3-Way * | PE213S | 479 |
| SPE5513D | 55 | Double-Acting | 333 | RD5513 | 551 | 38 | Electric | 4-Way | PE174 | 450 |
| SPE5513DS | 55 | Double-Acting | 333 | RD5513 | 1,679 | 137 | Electric | 4-Way * | PQ604S | 505 |
† Typical performance based on 7 bar and 700 bar pump specifications. Actual speeds may vary under operating conditions.
†† Pump standard with press. Other Power Team pumps can be substituted.
††† Holds pressure with motor shut off. Also has an automatic dump setting. Furnished with a 3.1 metre remote motor control.
*Solenoid valve with 24 volt remote control hand switch.
55 Ton H Frame Workshop Press Documents
For more information select from the following Product PDFs:
- Power Team Workshop Press – H Frame – 55 Ton Workshop Press Brochure (92 KB)
- Power Team Workshop Press Frames Operating Instructions (416 KB)
- Power Team Workshop Press Accessory Kit (135 KB)
- Power Team Workshop Press Accessories: V Blocks, Threaded Adapters & Rubber Tyre Set (86 KB)
- Power Team Cylinder Pump Sets (3235 KB)
- Power Team Hydraulic Hand Pumps P Series (142 KB)
- Power Team Electric Pumps PE21 Series (223 KB)
- Power Team Electric Hydraulic Pumps PQ60 Series (212 KB)
- Power Team Hydraulic Pumps Motor Controls (121 KB)
