Werner Weitner 50T / 50 Tonne Hydraulic Press WW-HP-50T
This product is no longer available and has been replaced in our range by the
Power Team 55 Ton H Frame workshop press.
The following information is provided as reference only.
50 Ton Hydraulic Workshop Press Features
- Capacity 50 ton max.
- Working pressure 700 bar
- Maintenance free construction
- Quick press table adjustment
- Protecting grid
- Double acting cylinder 300 mm stroke
- Electric driven power pack
Werner Weitner 50T Hydraulic Workshop Presses are applicable in automobile. commercial vehide, agricultural machine workshops, as well as mechanical shops. Ideal for force fitting and extraction of bearings, bushing shafts and bolts.
The Werner Weitner 50 t | 50 tonne hydraulic presses are perfectly suited for embossing, bending, aligning and stamping.
The hydraulic press table can be positioned both up and down side by cable winch that will allow the handling of various work pieces.
Werner Weitner 50 Tonne Hydraulic Workshop Press Technical Data
||50 ton / 490 kN
||700 bar Electro-Hydraulic unit
|Table Support Width
|Width Between Columns
|Lowest inset Height
|Bore Distance in Height
50T Hydraulic Press Ordering Options
||Electric driven Power pack 230V
||Electric driven Power pack 380V
||2 support plates with borehole Ø100 mm
||2 support plates with prism
||2 support plates with milled prism
||Pressure planger flat Ø 30 mm
||Pressure planger conical Ø 40 mm
- Press frame with presstable,
- Pressure gauge,
- Electric driven Power Pack,
- 1 x pressure planger flat Ø 50 mm,
- 1 x pressure planger conical Ø 50 mm,
- Ready to use.
For more information select the following Product PDF:
Werner Weitner 50T Workshop Press WW-HP-50t (102 KB)
If you require more information or have any
questions regarding Werner Weitner 50T Hydraulic Workshop Press or
Werner Weitner Hydraulic Presses,
please feel free to call us on (+61 3) 9553 4882 or 0412 720 638, send
us an email at email@example.com or use our Contact Form to submit an inquiry.