|
PJM Industrial are are also able
to offer a range of Lifting Slings and Ratchet Tiedowns (Marketed
under the name Lifting Slings Australia) a division of PJM
Industrial.
Slings:
Flat Webbing slings
can be used for all modes of shipping, freight and load
consignment.
The sling are made of a coated
and treated polyester yarn that does not damage refine,
polished or fragile surfaces and will exert less pressure
than wire rope and chains at the point of contact with the
load.
All Flat
Webbing Slings are manufactured to the Australian Standard
AS 1353.1-1997, and are colour
coded according to DIN-EN 1497-1 with a 7:1 safety factor.
Round Slings
are easy to use, efficient in operation and gental on all
surface contact.
All
round slings are colour coded to give easy indentification
of the safe working load.
The
round sling inner core is made from high tensile polyester
fiber, which is wound continuously without a join to
provide maximium possible strength. This core is protected
by a tough woven tubular sleeve also made of polyester
without side stitch. It serves to protect both the inner
core of the sling and the surface of the item being
lifted.
The low
stretch characteristics of the polyester yarn also prvent
LOAD BALANCE when lifing heavy loads.
Round
slings are unaffected by sunlight, humidity, grease and
may be used in multitude of lifing appications.
All Round Slings are manufactured to the Australian
Standard AS 1353.1-1997, and are
colour coded according to DIN-EN 1497-1 with a 7:1
safety factor.
(Note: Larger capacity can manufactured and supplied
upon request)
Note: Both the Flat Webbing and Round Slings come provided
with Test Cerificate.
Ratchet Tiedowns
have been designed and tested to provided maximum load
protection and are produced to AS/NZ 4380:2001
standards for Cargo Retraint Systems
Links to PDF
Round Slings
- from 1000kg up to 12,000kg lift
capacity in various lengths
|
